travisl1213

how much hp gain are u looking at with underdrive pullies and are they worth the money. how hard is the install

Like778

you gain about 10hp at he top in. install? can be a pain in the a**. the crankshaft pully is the hardest.

gt96stang

Not hard at all, It actually took us about 1 hour or so to do it on my car. You need the right tools, but other than that, it's pretty simple. We did a lot of standing around and talking as well while we were working on my car.

WAG03GT

Sorry to bust your thread but im puttin u/d's on wed. and i was wonderin if ill need to get a new belt or not ?...but yes you will see around 10 hp from them..so ive heard

Like778

no you will not need a new belt, unless the one you have is worn. enjoy the added hp

sandcracker21

you can reuse your belt, but its a good excuse to get a new one

ilbehaved

how hard is it to get the steeda crank pulley back in the hub?

gt96stang

If you follow the instructions, you will have no problems at all with it.

Chopper

I'll add one thing.Be sure to use plenty of RTV sealer in the crank pulley keyway.If you don't it WILL leak like he11.

dlazrael

not trying to hijack, but is steeda the best UDPs out there? My blower project is on hold for a bout a year or so, so I figure the $200 UDP investment isnt a bad idea (since it can save on gas mileage!) anyway, what is the best UDP? (obviously NOT piggyback)