thats what i was planning on doing tonight when i got back home

 

the idle screw isnt pre set you have to set the idle yourself!!! it's set good enough to start car and run but after it warms up you must adjust the screw

 

Before you adjust anything disconnect the battery for 5-7 minutes to reset the KAM (Keep Alive Memory); particularly since you apparently started the car with the TPS disconnected. [/align][/align]This is where the PCM stores learned values like idle airand short/long term fuel trims. If you didn't do this when you installed the new TB you should have; any time you mess with anything intake related that isthe MAF, or is after the MAF(I.e. that might actually alter airflow or the measurement of same) you should clear the KAM.[/align]

 

I completely forgot to mention that cliffy... It's almost like second nature when I am working on things related to this. Amazing what you forget just because it's so common.

 

when i was changing it out i had the battery off and then i had it off alday yesterday since i didnt go any were so that is reset