i have 4.6 problems,
#11
i wish i could but this is the only car we have right now (still live with parents) .
im thinking about pulling the valve cover and taking a peek to see if there is anything out of the ordinary but it looks like a pain in the ***.
im thinking about pulling the valve cover and taking a peek to see if there is anything out of the ordinary but it looks like a pain in the ***.
#13
Like you just said take the valve cover off and check the rocker arms. Thats the best thing you can do as of right now. Your miss is probably coming form the valve not opening.
But I do second that exhaust leak.
#16
Hey man that is not a rod!!!! A rod is more of a clanking not a rattle.
Like you just said take the valve cover off and check the rocker arms. Thats the best thing you can do as of right now. Your miss is probably coming form the valve not opening.
But I do second that exhaust leak.
Like you just said take the valve cover off and check the rocker arms. Thats the best thing you can do as of right now. Your miss is probably coming form the valve not opening.
But I do second that exhaust leak.
Honestly, mine knocks worse than that and I too ran it low on oil. I rebuilt it, changed the mains and rod bearings, I rebuilt the timing system and it still knocks. I am convinced that it's bad lifters, but I am not going to worry about it. If it keels over, I will get a PI motor and slap it in.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
4.6L (1996-2004 Modular) Mustang
3
10-09-2015 03:27 PM