4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

dyno #s low

Thread Tools
 
Search this Thread
 
Old 09-20-2009, 12:26 PM
  #21  
fisher2985
2nd Gear Member
Thread Starter
 
fisher2985's Avatar
 
Join Date: Aug 2007
Location: north carolina
Posts: 206
Default

also plan on reinstalling the granitelli tune. (ive been messing with it) take it to the track and then mabybe adjust timing and fuel.
fisher2985 is offline  
Old 09-20-2009, 01:41 PM
  #22  
GTRACER88
5th Gear Member
 
GTRACER88's Avatar
 
Join Date: Dec 2007
Location: Houston, Tx
Posts: 2,112
Default

I have the same bolt ons as you do and only put down 238 rwhp and 278 ftlbs of torque. Thats not off buddy, its what our cars put down...
GTRACER88 is offline  
Old 09-20-2009, 01:59 PM
  #23  
z06saleen
 
z06saleen's Avatar
 
Join Date: Nov 2008
Location: virginia
Posts: 12
Default

Originally Posted by GTRACER88
I have the same bolt ons as you do and only put down 238 rwhp and 278 ftlbs of torque. Thats not off buddy, its what our cars put down...
i have a 2002 supercharged saleen. Stock it put down 300rwhp on the dyno.
z06saleen is offline  
Old 09-20-2009, 02:44 PM
  #24  
cliffyk
TECH SAVANT
 
cliffyk's Avatar
 
Join Date: Dec 2006
Location: Saint Augustine, FL
Posts: 10,938
Default

Originally Posted by fisher2985
also plan on reinstalling the granitelli tune. (ive been messing with it) take it to the track and then mabybe adjust timing and fuel.
Don't mess with the fueling unless you have a wide band O2 sensor, or have a very sound (pun intended) knowledge of what even subtle pinging sounds like--if you have such knowledge then back off immediately at the very first hint of "pink, pink, pinkety-pink, pink"...
cliffyk is offline  
Old 09-20-2009, 07:15 PM
  #25  
fisher2985
2nd Gear Member
Thread Starter
 
fisher2985's Avatar
 
Join Date: Aug 2007
Location: north carolina
Posts: 206
Default

just installed o2's, and put the tune back to the way granitelli intended it to be. at some point in time i went 4% richer at wot and that would explain my rich air fuel ratio. cant wait to get back to the track now.
fisher2985 is offline  
Old 09-20-2009, 08:24 PM
  #26  
lilcrate
4th Gear Member
 
lilcrate's Avatar
 
Join Date: May 2009
Location: MO
Posts: 1,030
Default

DYNO TUNE
lilcrate is offline  
Old 09-20-2009, 08:26 PM
  #27  
fisher2985
2nd Gear Member
Thread Starter
 
fisher2985's Avatar
 
Join Date: Aug 2007
Location: north carolina
Posts: 206
Default

Originally Posted by lilcrate
DYNO TUNE
i dont think it has enough mods to justify a 300 dyno tune right now. but when a get cams.......
fisher2985 is offline  
Old 09-20-2009, 08:31 PM
  #28  
lilcrate
4th Gear Member
 
lilcrate's Avatar
 
Join Date: May 2009
Location: MO
Posts: 1,030
Default

Originally Posted by fisher2985
i dont think it has enough mods to justify a 300 dyno tune right now. but when a get cams.......
That 300 dollars will probably get you more hp than your pullies, and ensure the safety of your engine.
lilcrate is offline  
Old 09-20-2009, 08:35 PM
  #29  
99BlackPonyGT
aka 'Negative Nancy'
 
99BlackPonyGT's Avatar
 
Join Date: Jul 2007
Location: Ohio
Posts: 4,839
Default

Originally Posted by lilcrate
That 300 dollars will probably get you more hp than your pullies, and ensure the safety of your engine.
exactly....especially if youre in your tune changing the fuel around
99BlackPonyGT is offline  
Old 09-20-2009, 09:05 PM
  #30  
fisher2985
2nd Gear Member
Thread Starter
 
fisher2985's Avatar
 
Join Date: Aug 2007
Location: north carolina
Posts: 206
Default

Originally Posted by 99BlackPonyGT
exactly....especially if youre in your tune changing the fuel around
i put it back to the way granitelli had it, but its gonna get dyno tuned when it gets more mods.
fisher2985 is offline  


Quick Reply: dyno #s low



All times are GMT -5. The time now is 07:05 PM.