Compatibility - Hot Rod Cams / Whipple?
11-20-2008, 07:45 AM
#41
2nd Gear Member
Thread Starter
Join Date: May 2008
Location:
Posts: 150
MyLocalDJ, thanks i see now how they
did it....pretty cool....hopefully by next
summer brenspeed will have (good) ready
made tunes for whipples + hot rods
SirKnightTG, you might hear the tools, but
it's only because i'm working on another
special project right now....... :-)
did it....pretty cool....hopefully by next
summer brenspeed will have (good) ready
made tunes for whipples + hot rods
SirKnightTG, you might hear the tools, but
it's only because i'm working on another
special project right now....... :-)
11-23-2008, 12:09 PM
#43
2nd Gear Member
Thread Starter
Join Date: May 2008
Location:
Posts: 150
BTW, car is still running great. I think I may lower the idle a little...it is set at 875 currently but I may drop it about 50 RPMs to get a little more lope and see if it causes any problems.
11-25-2008, 04:41 PM
#44
2nd Gear Member
Thread Starter
Join Date: May 2008
Location:
Posts: 150
Here is a video clip taken today after I lowered the idle RPM slightly from 875 to 825. Still no idle issues. The car runs great.
http://www.youtube.com/watch?v=TvZgx_fxQuw
http://www.youtube.com/watch?v=TvZgx_fxQuw
11-25-2008, 07:06 PM
#46
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
man does that sound sweet!
Here is a video clip taken today after I lowered the idle RPM slightly from 875 to 825. Still no idle issues. The car runs great.
http://www.youtube.com/watch?v=TvZgx_fxQuw
http://www.youtube.com/watch?v=TvZgx_fxQuw
Very nice!
03-05-2009, 03:08 PM
#49
2nd Gear Member
Join Date: Jun 2006
Location:
Posts: 415
Sorry for bringing this thread back from the dead, but curious how everyone's Hot Rod cams are doing in their FI applications.
Got a couple questions too if anyone knows..
Can these FRPP HR cams co-exist with a Vortech SC?
Can these cams come even close to passing emissions (I'm in CA)?
Got a couple questions too if anyone knows..
Can these FRPP HR cams co-exist with a Vortech SC?
Can these cams come even close to passing emissions (I'm in CA)?
03-05-2009, 04:26 PM
#50
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
how's it goin tacobill, first off thanks for
all the write ups.
it's a good question about emissions... i
think the major factor is whether you have cats
or not and second, whether they do sniffer testing
or just OBDII.
maybe someone from cali who's got them and
is catless, can weigh in.....
all the write ups.
it's a good question about emissions... i
think the major factor is whether you have cats
or not and second, whether they do sniffer testing
or just OBDII.
maybe someone from cali who's got them and
is catless, can weigh in.....