rear main seal
#1
rear main seal
the motor doesnt have to come out when you remove the rear main seal in a 89 mustang gt right? im plannin on doing it this saturday so i need to know now. i think there is about a half an inch between the oil pan and the k-member so i think that i can pry it out with a few sheetmetal screws in the seal. Does anyone know how hard the front seal is to remove?
#2
rear main seal
front seal will be easier than the rear one. But you will have to remove the accessories to do it right. You could probably try to remove with w/a screwdriver, but you might damage something that way. Best thing to do is to remove the timing chain cover and replace the seal that way.
#4
rear main seal
i have to lower the oil pan right? cause if any one has done it on a stang i need to know. i dont want to take it all apart and not be able to. i can take it apart in about a hour so it wont be a problem. if any one has any suggestions please help
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM