philthy89fifty

what length pushrods do i need with e-cam 1.7 and gt40 heads. i know i need to measure but someone on here has to have this setup or ran into the same situatiuon.

rmodel65

they ise the same ones e7's would use so probably the stock one if the rockers a re direct boltons! but spring for some good ones!

philthy89fifty

ya my e7's with my 1.7 rockers are fine with the stock pushrods i'm just concirned because my friend has the same setup but with the gt40s and his pushrods are too short. what do you mean by a direct bolt on in regards to the roller rockers?