5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Rear Seat Belt routing?

Thread Tools
 
Search this Thread
 
Old 07-24-2006, 01:22 PM
  #1  
00limited7
2nd Gear Member
Thread Starter
 
00limited7's Avatar
 
Join Date: Aug 2005
Location: Indy
Posts: 435
Default Rear Seat Belt routing?

I have a question on rear seat belt buckles. Do the rear seat belt buckles criss cross over the hump before they come through the lower seat ? I was wondering if someone took them off and put them back on wrong? The seat was loose and the buckles were under the seat so I tried to get the belts to pull through the holes but it didn’t seem like the belts where long enough. If someone could give me some insight on this I would really appreciate it. I've got to give my son a ride home today and there will be two friends with him so they are going to need some belts.

Thanks again!

Roger
00limited7 is offline  
Old 07-24-2006, 01:27 PM
  #2  
Boss_Hotrod
5th Gear Member
 
Boss_Hotrod's Avatar
 
Join Date: Apr 2006
Location: NC
Posts: 2,166
Default RE: Rear Seat Belt routing?

They shouldnt cross the tranny tunnel. They should come striaght up and the buttons should face the center of the car.
Boss_Hotrod is offline  
Old 07-24-2006, 01:34 PM
  #3  
5.0 MPG
4th Gear Member
 
5.0 MPG's Avatar
 
Join Date: Dec 2005
Location:
Posts: 1,933
Default RE: Rear Seat Belt routing?

no criss crossing!
5.0 MPG is offline  
Old 07-24-2006, 02:39 PM
  #4  
00limited7
2nd Gear Member
Thread Starter
 
00limited7's Avatar
 
Join Date: Aug 2005
Location: Indy
Posts: 435
Default RE: Rear Seat Belt routing?

Thats what I thought! Some one must have put them in wrong. Here is a pic I just took.

Thanks guys

[IMG]local://upfiles/21276/CEF85CFC559E4483B0A0716556ED86AD.jpg[/IMG]
00limited7 is offline  
Old 07-24-2006, 02:48 PM
  #5  
HACKGT350
6th Gear Member
 
HACKGT350's Avatar
 
Join Date: Jan 2006
Location: new jersey
Posts: 6,635
Default RE: Rear Seat Belt routing?

all you gotta do is pull them up and they should only go so far so they really wouldnt be long enough to criscross and come up to be buckled
HACKGT350 is offline  
Old 07-24-2006, 02:51 PM
  #6  
5.0 MPG
4th Gear Member
 
5.0 MPG's Avatar
 
Join Date: Dec 2005
Location:
Posts: 1,933
Default RE: Rear Seat Belt routing?

ORIGINAL: 00limited7

Thats what I thought! Some one must have put them in wrong. Here is a pic I just took.

Thanks guys

[IMG]local://upfiles/21276/CEF85CFC559E4483B0A0716556ED86AD.jpg[/IMG]
on my 91 those belts are bolted with the inner bolts on the seat bracket? where are your brackets?
5.0 MPG is offline  
Old 07-24-2006, 04:03 PM
  #7  
00limited7
2nd Gear Member
Thread Starter
 
00limited7's Avatar
 
Join Date: Aug 2005
Location: Indy
Posts: 435
Default RE: Rear Seat Belt routing?

I'll go out and look after work. Damn slave driver won't let me walk out and take a look.

Bosses are bishes...
00limited7 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zsmart
Convertible Tech
2
02-29-2016 08:33 AM
Oak
Classic Mustangs (Tech)
3
09-14-2015 03:08 PM
wileec
S550 2015-2023 Mustang
4
09-11-2015 10:16 AM
mrmrultimate
Texas Regional Chapter
2
09-10-2015 09:43 AM



Quick Reply: Rear Seat Belt routing?



All times are GMT -5. The time now is 08:53 AM.