jegs traction bars/rear upper control arm mounts
08-25-2006, 12:46 PM
#1
5th Gear Member
Thread Starter
Join Date: Jul 2006
Location: Alton, New Hampshire
Posts: 2,518
jegs traction bars/rear upper control arm mounts
http://www.jegs.com/webapp/wcs/store...tegoryId=10063
has anybody used, seen or heard of anybody using this, and if so how did it work.. just currious. might be one of my next purchases if it will work. if i get it i plan on putting it in when i put in new upper and lower control arms.
has anybody used, seen or heard of anybody using this, and if so how did it work.. just currious. might be one of my next purchases if it will work. if i get it i plan on putting it in when i put in new upper and lower control arms.
08-25-2006, 01:35 PM
#2
5th Gear Member
Join Date: May 2005
Location: Central New York
Posts: 3,850
RE: jegs traction bars/rear upper control arm mounts
no experience with these but they make sense reading the info and mathmatical sense in locating the rear end, I'd weld them even though they are bolt on though. JMO Good Luck
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
