Motor Bogging...Help...
#1
Motor Bogging...Help...
Today I installed a new 255lph fuel pump and high flow rails with fuel pressure regulator. The regulator is set to 40psi from the factory, or so they say. What is a good pressure to set it to in order to have the right amount of fuel running to the motor? I also did the edelbrock performer upper/lower intake, 76mm MAF, 70mm TB/EGR, 24lb injectors, and intake.
My car is bogging tremendously when im above 1/2 throttle and backfires a little here and there. What do i have to do here?
Thanks in advance for any help.
My car is bogging tremendously when im above 1/2 throttle and backfires a little here and there. What do i have to do here?
Thanks in advance for any help.
#2
RE: Motor Bogging...Help...
your getting too much fuel to me it sounds like get a fuel pressure guage and see what you press is at and start form there maybe its a bit high or you have a injector to is stickin open longer too
Thread
Thread Starter
Forum
Replies
Last Post
logan409
4.6L (1996-2004 Modular) Mustang
10
09-26-2015 07:43 PM