No START HELP
#12
RE: No START HELP
If you follow your red battery wire it will lead you to your solenoid. It should go right to it. Turn key on jump both big posts with screwdriver. If it starts then maybe the solenoid is bad. But like the others said make sure its in neutral.
#16
RE: No START HELP
The starter gets it's reference signal from the small post on the top... just cross the one that is closest to the firewall, and the small one on the top. If it cranks, than your problem is either the wire that runs between the ignition switch and the solenoid, the ignition switch itself, or the neutral safety switch... if it doesn't crank, your problem is going to be either the solenoid or the starter itself. If it doesn't crank, pull your starter and bench test it.
Vic
Vic
#18
RE: No START HELP
Damn... I thought you had a fox body... I guess I should read the posts a little more carefully. Sorry about that dude. I don't know where your starter solenoid is. Could be on the starter, can't say for sure. BTW (sorry it's off topic) I like the KB... looks good in there.
Vic
Vic
#20
RE: No START HELP
I can't be sure, but if you look at the starter, you can see the solenoid on there. If it is, just pull the starter and bench test it. If you don't have the appropriate tools to bench test it yourself, bring it to either Advance or Auto Zone, either one of them will be able to check your starter and solenoid for you.
Vic
Vic
Thread
Thread Starter
Forum
Replies
Last Post
dalefrancis88
5.0L General Discussion
2
09-11-2015 07:15 AM