cervini hood needs repair (new crack pics)
05-07-2007, 12:50 AM
#1
3rd Gear Member
Thread Starter
Join Date: Apr 2007
Location:
Posts: 780
cervini hood needs repair (new crack pics)
Hey guys, I just got my Cervini3" cowl hood from e-bay, it has a few miles on it and has a few cracks. Does anyone know the best fix for fiberglass cracks? I was thinking about mixing up a little resin and filling with that, but is this the proper way or do I need something different? 
j/k
05-07-2007, 08:32 AM
#8
3rd Gear Member
Thread Starter
Join Date: Apr 2007
Location:
Posts: 780
RE: cervini hood needs repair
The guy said it was 3" cobra R , dont know, didn't measure it, don't care, for the price I paid I would not be mad if it was a 2 3/4 ! haha How about the fibereglass cracks? any idea on that anyone?
05-07-2007, 05:48 PM
#10
3rd Gear Member
Thread Starter
Join Date: Apr 2007
Location:
Posts: 780
RE: cervini hood needs repair
well, heres what I came up with. Looks like it may have come open unexpectedly- I'll be getting pins for sure. The biggest problem was over the pass side hole for the cowl opening, looks like it made contact with the wiper arm. Also one well nut was torn out for the hinge. Put new wellnut in and reinforced with resin and resined the crack in the cowl hole. there was some seperating cracks at the seams in the rear corners so I worked some resin in there as well. hopefully it holds when I take the clamps off!
Thread
Thread Starter
Forum
Replies
Last Post
wishinsky
2010-current S197 Appearance Section
1
09-21-2015 09:48 AM
