RX7Driver4Life

I have a 302 Stroked to a 347 in my RX-7 and im having problems wiring the distributor. I have a stock 85 ford pickup distributor that is for a carbed engine now my question is how do Iwire the6AL to that distributor. I know it is a magnetic pickup and what I have is the purple and green conector from the MSD and the three slots on the bottom side of the distributor. I also have the 92 ditributor with the original igniton moduel but some one told me i dont need to use it with the 6al that it goes directly to the pickup sensor.

Broham

First off, what color are the wires leaving the truck distributer? According to my F-series Haynes manual, you should have a pnk-lt blu wire and an org-yel wire. Is this correct?