5.0 Crate motor
#21
RE: 5.0 Crate motor
That motor looks insane...
So that is what has been in the works for all this time...
A while back when we installed the motor in the 89, we installed the FRPP EFI "Mustang" logovalve covers that said they are the same size as the stock ones and they wouldn't work with the Cobra intake because the throtle linkage would bind, so we pulled them and put the stockers back on (the linkage was the last thing we put on after the complete install). What BS... They were shaped totaly different. (Made in China crap)
So that is what has been in the works for all this time...
A while back when we installed the motor in the 89, we installed the FRPP EFI "Mustang" logovalve covers that said they are the same size as the stock ones and they wouldn't work with the Cobra intake because the throtle linkage would bind, so we pulled them and put the stockers back on (the linkage was the last thing we put on after the complete install). What BS... They were shaped totaly different. (Made in China crap)
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
treesloth
New Member Area
4
09-28-2015 07:03 AM
logan409
4.6L (1996-2004 Modular) Mustang
10
09-26-2015 07:43 PM