Ketis

im converting my 88 mustang from auto to stick and i was curious if the pedals and clutch cable would work with a t5 i got out of a 5.0 mustang.

thanks,
keith

mjr46

the 4cyl clutch cable has a different end on it that connects to the clutch fork so you'll need a 5.0 clutch cable as for the clutch pedals they will work but if it's anything like my 4cyl conversion the 4 cyl pedals are closer together and make it a little tight shifting...I had it like that for 2 years until a few months ago I performed the swap to a set of 5.o pedals..I even heated the 4cyl set up and spread it apart but it never seem to work right

rmodel65

i believe the 4cylinder pedal is a little shorter but it can be used