Intake Question
05-31-2005, 12:40 AM
2nd Gear Member
Thread Starter
Join Date: Oct 2004
Location: Dayton, Oh
Posts: 338
RE: Intake Question
Also will i need 24lb injectors?
06-01-2005, 01:59 AM
2nd Gear Member
Thread Starter
Join Date: Oct 2004
Location: Dayton, Oh
Posts: 338
RE: Intake Question
Anyone?
06-01-2005, 12:49 PM
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 5,205
RE: Intake Question
Quote:
ORIGINAL: 92stang
you will need them when you get your heads but it would be a good idea to get a AFPR with a guage
06-01-2005, 01:30 PM
2nd Gear Member
Thread Starter
Join Date: Oct 2004
Location: Dayton, Oh
Posts: 338
RE: Intake Question
Ok thanks man.
06-01-2005, 01:31 PM
2nd Gear Member
Thread Starter
Join Date: Oct 2004
Location: Dayton, Oh
Posts: 338
RE: Intake Question
What is a good gauge to get BBK? Kirban?
06-01-2005, 02:14 PM
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 5,205
RE: Intake Question
the kirban is a good AFPR and you can get it with a guage on eBay for $100
06-01-2005, 02:52 PM
I ♥ Acer
Join Date: Jul 2003
Location:
Posts: 11,394
RE: Intake Question
because those wires have a ton of resist in them something like 300+ ohms per foot vs holleys 25 ohm per foot
06-01-2005, 02:55 PM
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 5,205
RE: Intake Question
i have splitfire wires on my car and they are rated 92% less resistance over stock
06-01-2005, 03:11 PM
I ♥ Acer
Join Date: Jul 2003
Location:
Posts: 11,394
RE: Intake Question
pull 1 off to check resit..I'm curious
06-01-2005, 03:13 PM
6th Gear Member
Join Date: Feb 2005
Location:
Posts: 5,205
RE: Intake Question
how do uu check it i have never done it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
cardsrus1
4.6L (1996-2004 Modular) Mustang
19
09-15-2015 08:37 AM
Mustangmalo
General Tech
2
09-06-2015 05:22 PM
RE: Intake Question
