92hatchLX

My throttle is sticking and I beleive it's my throttle body getting old and worn out. I don't have any mods done and when it comes time to replace it I'm not going to go with stock parts. I'm thinking a 65 throttle body, but what about the MAF probably a 73 or 70mm? Besides ebay, who carries the best items with the best prices? Just for the record, what kind of gains would I see performance wise??

Quik

before you go buy one. clean your IAC and lube up your linkage

stanglx2002

for now do what ohsoquick02 said to do

to answer your question yes i would go with a 65mm TB and 73mm MAF IMO i would get a C&L MAF and get there Inlet pipe too

vfast

I would go ahead and get the 76mm maf and a professional products tb off e-bay for 139.99

stanglx2002

for $350 you can get a TB, MAF, and inlet tube off ebay. Like vfast said the tb is $140 and the C&L MAF Kit is $200 and you should have an increase of about 20 hp or more with those parts

vfast

you can get a used maf for like 75-95.00 and I have inlet tube for 40.00