Porting Stock Heads
#1
Porting Stock Heads
So I want a little more power out of my car but I have pretty much no money, Im saving for car insurance and college. Is it worth it to port the stock heads. I figure I can pick up a set of stockers for 50-100 bucks and port them and get new guides and all that installed. Im not out to make a all out race car I just want the heads to flow a little better. Is it worth it? I plan on doing mass air conversion and a cam later in the summer and I dont want the heads to hold me back.
Jay
Jay
#4
#6
the little exhaust bump taken out will give it some.
If you want to spend 2 weeks on them, you could take them out to the exhaust manifold gasket.
I have seen a car run 7.20s with e7 heads and a 144 b&m blower. (nitrous too, he didn't claim it but, it was)
If you want to spend 2 weeks on them, you could take them out to the exhaust manifold gasket.
I have seen a car run 7.20s with e7 heads and a 144 b&m blower. (nitrous too, he didn't claim it but, it was)
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM