JoHnNy sAvAgE

what size are the 93 cobra mass air meters n-e-1 know? I found a guy who has one that says it's 70mm... but I thought the cobra's were 65 right??? any how... could I do a 70mm tb with the stock intake w/out having to port???

Quik

cobras maf was indeed 70mm. their tb was 65

92hatchLX

I'm pretty sure that you can run a 70mm TB on the stock intake.

Quik

no its to large. you would have to port the intake to match the opening of the 70mm tb. but then you better port the whole intake. you can bolt it up but it will still restrict flow and wont be worth it

JoHnNy sAvAgE

would you suggest just getting a 65mm tb with the cobra 70mm mass air??

Quik

i personally wouldnt waste my time with a cobra 70mm especially since its calibrated for 24# injectors.

JoHnNy sAvAgE

well then just a 70mm for 19#... would I get any benefit from that compared to stock? (w/the tb)

Quik

i would go with a 73mm with a stock tb or a 65 tb. or you could run a 76mm with a 65mm tb

on stock intake i wouldnt do either unless it was ported

JoHnNy sAvAgE

your right... I should just save that $ and get an intake huh?? right on quick thanks for the help!!