Just installed Clutch and its leaking Tranny fluid!!
#1
Just installed Clutch and its leaking Tranny fluid!!
Just finished up installing a clutch kit. I lost a bit of tranny fluid during install and filled it up in the fill hole until it dripped and tightened up the plug real good.
I took it for a spin and it feels great, but when i returned home I noticed it smoking a bit and there was a good size puddle of tranny fluid.
I did break the end of the speedo cable and left it disconnected at the trans....could that be the problem??
Please help! Thanks guys!
I took it for a spin and it feels great, but when i returned home I noticed it smoking a bit and there was a good size puddle of tranny fluid.
I did break the end of the speedo cable and left it disconnected at the trans....could that be the problem??
Please help! Thanks guys!
#3
It looks like what i broke/bent was the speed sensor. I don't have money for the cable right now, so I'm wondering if I can throw a new sensor in there and block it off or put a bolt in there with rtf.
#4
Got it fixed....I broke just the speed sensor, not the speedo cable. I went and got a new sensor and threw it on without the gear b/c that broke trying to fix the old sensor.
Besides not having a speedometer for right now, the clutch feels like one on a new car.
I did a Ram HDX clutch kit with a new ford flywheel, clutch fork, pivot stud, rear-main, hardware, bearing retainer, pilot and throwout bearing. I also got a Maximum motorsports clutch cable with a firewall adjuster and an aluminum quadrant
Besides not having a speedometer for right now, the clutch feels like one on a new car.
I did a Ram HDX clutch kit with a new ford flywheel, clutch fork, pivot stud, rear-main, hardware, bearing retainer, pilot and throwout bearing. I also got a Maximum motorsports clutch cable with a firewall adjuster and an aluminum quadrant
Thread
Thread Starter
Forum
Replies
Last Post
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM
Greyshot
4.6L (1996-2004 Modular) Mustang
2
08-15-2015 03:32 AM