STAMPEDE

I just got a set of Weld Draglite 15 x 8, 5 bolt rims. I am looking for a good set of drag radials to put on them. I am running a set of Nitto 555's on my 17inch cobras now and they are allright but I am leaning toward a set of Mickey Thompson's. What size tires would you guys suggest for the welds ? They are only going to be used for track duty and I want something that wont rub. The car is a 94 GT stock ride height. Thanks for any help .....

grabbem88

go with mickey thompsons...i'm using bfg's,and they are ok..after about a hundred passes.
my 98 i had 275/50/15's,and 275/40/17's for the street...

nitrous_bob

26 x 10.5 X 15

if you get the radial instead of the bias-ply the tire guys can give you the metric size.

rsw007

go mt dr's i love mine. you can go 275/50 or 275/ 60 depending on if you want 26" or 28" tire.

eaturls1

i would go with 275/60 rather than 275/50. i put 275/50 on a foxbody stock height and they rubbed goin round a turn.

FoxRod

275/60's are bigger.

cammedlx

^^^^Samething i was thinking...i runned a 275/50/15 dr's on my 8" welds with 5.5" backspacing with no problems...and the car was lowered.

marx91

mt dr's are a good tire, i know a few ppl that have them, go with the 275/50
a 28" tire will be a little too tall