Just got back from the drag...
#13
RE: Just got back from the drag...
ORIGINAL: rsw007
your mph is good for mid 13's you need to get 60ft's down. congrats and good luck.
your mph is good for mid 13's you need to get 60ft's down. congrats and good luck.
#14
RE: Just got back from the drag...
ORIGINAL: SN95Stang
His trap is good for about a 13.90 check out my ET in my sig. i pretty much launched at 5000RPMs and ran it hard the whole way thru and thats the best i can get.
ORIGINAL: rsw007
your mph is good for mid 13's you need to get 60ft's down. congrats and good luck.
your mph is good for mid 13's you need to get 60ft's down. congrats and good luck.
#15
RE: Just got back from the drag...
ORIGINAL: rsw007
your mph is good for mid 13's you need to get 60ft's down. congrats and good luck.
your mph is good for mid 13's you need to get 60ft's down. congrats and good luck.
#16
RE: Just got back from the drag...
i pulled a2.035 on brand new drags launching at 5000RPMs and ran a 13.99 at 98.25 MPH there was a guy from a mustang performance shop watching me run and he said that there was no way i cud possibly have driven any better. D/R only get u a 1.7 60' if u hav more than a stock motor. UPR's full drag suspension in their drag car only pulls 1.6 60' so if u can pull a 1.7 on no suspension then idk how the hell ur doing it. The kid who ran a 14.03 is def. driving very well but D/R alone will not get him into the mid 13s. he will def need gears to get there. I am also driving a 95 GT so mine is a tad heavier.
#17
RE: Just got back from the drag...
i have friends with minor bolt-ons cutting 1.8-1.9s on yokohama street radials... look at rsw007's sig for example, he has very minor suspension mods and cuts 1.4s on the same drag radials you have, granted this was on a 100shot, but i believe even N/A he cuts 1.5s with bolt-ons only. with some decent driving it's pretty normal to run a 2.0-2.1 on a bone stock stang right down to the street tires. with some BFG DRs i would be pissed if i wasn't AT LEAST cutting 1.8s.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM