1GT2NV

heyy ...i have an 89 gt and i want to install a e303 cam whats the labor usually cost on the installation just a ballpark estimate would be awesome



thanks

nacanitihs

why e303? my buddy has one and i dont like the way it sounds at all. my suggestion is stay away from the letter cams and get a comp cam.

wiljersey

i was thinking of the e303 or the f303. i just installed the gt40 upper & lower intakes and today i picked up some gt40p heads. why the comp cam, just sound or performance or both? would the cam that comes in the v8 explorers add any power or is it the same as the stock 5.0? sorry to jack your thread but i was going to start the same one.

mjr46

8-10 hr job but IMO putting a cam in a stock stang without a head upgrade is a waste..H/C/I ALL at once ftw

nacanitihs

ill be doing the same swap. ive just heard bad things about the letter cams. and comp for both sound and performance granted they do cost $80 more. but worth it imo. ill be going with the comp xe270hr which is similar to the f303. but the small differences make all the difference. and im using the gt40ps and the explorer intake.

the explorer cam is garbage. way worse than the stock 5.0 cam. also when you switch to thoes heads make sure you swap the springs for ones that will handle ur cam.

mjr46

^^^^comp xe series cams are nice ots cams....mine works well!!..you'll like them

wiljersey

thanks i think im going to replace the springs, valves, rods, etc.... and i know its expensive to have them port and polished but is it worth it

OneFine89Mustang

the trickflow stage 1 cam sounds amazing...

w8less

dont just add the cam its a waste. not worth the work for the gain

1GT2NV

thanks guys its partly for both power and sound but mainly to get my foot in the door of internal motor work