FinnishMafia89

I know this gets kind of old but if anyone has a similar set up/mod list/ just knows this kind of thing let me know....


Say I have a cold air intake, bigger throttle body (75mm??), Cobra 5.0 upper and lower intake manifold, GT40 heads, BBK longtube headers, BBK shorty H-pipe with cats, and a flowmaster after cat.

What kind of horse power can I expect to see from this set up?


Thanks,


Mike

mjr46

260-270 with a good dyno tune

NoGo95GT

I dynoed 243rwhp and 287rwtq. However, I have an auto. Mods at the time were GT-40 Intake, full exhaust(BBK H w/cats, Flows, BBK Shorty's) TrickFlow heads, 75mm Mass air, Underdrive pulleys, and STOCK cam. After adding the proper fuel(190lph pump, 30lb injectors, adj. fuel reg.,), Trickflow Stg-1 cam and tuned by Tweecer tuner, I made 271rwhp and 311rwtq.

stanguy306

my car made exactly 271 with those mods....add a 100 shot dry....and makes a fun car.....o and an e cam

Timspony

You do not need anything bigger than a 65mm TB...waste...Everything else will give you about 50-65 hp with a good tune....bump your timing to 13-14 deg. with some super unleaded also...