5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

dyno!!!!!!!

Thread Tools
 
Search this Thread
 
Old Dec 22, 2008 | 01:39 PM
  #21  
86 5.0L's Avatar
86 5.0L
6th Gear Member
 
Joined: Jul 2006
Posts: 6,882
From: San Diego, CA
Default

Originally Posted by FivePointOhh
nothin like spendin a couple hundred dollars to make sure you dont grenade your motor
fixed
Old Dec 22, 2008 | 01:49 PM
  #22  
FivePointOhh's Avatar
FivePointOhh
in limbo
 
Joined: Jan 2007
Posts: 7,300
From: Iowa
Default

whats the difference of your own computer telling you you're lean or a 100-400 dyno computer telling you your lean? if you dont have the money dont get one done unless you need with with nitrous or blower. he doesnt have the money so i'm trying to help him fix his problem without spending a couple hundred bucks so he doesnt gernade his motor and can enjoy his car a little bit.
Old Dec 22, 2008 | 02:26 PM
  #23  
skumbee's Avatar
skumbee
Thread Starter
2nd Gear Member
 
Joined: Sep 2006
Posts: 215
From: ca
Default

hmmm what the hells an AIC????
Old Dec 22, 2008 | 02:43 PM
  #24  
skumbee's Avatar
skumbee
Thread Starter
2nd Gear Member
 
Joined: Sep 2006
Posts: 215
From: ca
Default

Originally Posted by 86 5.0L
fixed
thats what one of my friends told me might happen if i dont get the tune sooo im abit confuse on what 2 do next :S
Old Dec 22, 2008 | 02:59 PM
  #25  
FivePointOhh's Avatar
FivePointOhh
in limbo
 
Joined: Jan 2007
Posts: 7,300
From: Iowa
Default

if you follow some of the advice given earlier in the thread you can tune it yourself without fear of destroying your motor. it wont be dead nuts accurate for a/f but you sure as hell wont blow up your motor due to lean conditions. and you'll get it running right and you can enjoy your vehicle and learn a bit about your cars computer abilities
Old Dec 22, 2008 | 03:01 PM
  #26  
crusin92red5.0's Avatar
crusin92red5.0
3rd Gear Member
 
Joined: Jul 2005
Posts: 998
From: sleeping with the enemy
Default

Originally Posted by skumbee
hmmm what the hells an AIC????
i think you mean IAC=Idle Air Control. it connects to your tb=thottle body
Old Dec 22, 2008 | 03:08 PM
  #27  
skumbee's Avatar
skumbee
Thread Starter
2nd Gear Member
 
Joined: Sep 2006
Posts: 215
From: ca
Default

oooh is it that lil screw on the TB?????
Old Dec 22, 2008 | 03:15 PM
  #28  
FivePointOhh's Avatar
FivePointOhh
in limbo
 
Joined: Jan 2007
Posts: 7,300
From: Iowa
Default

no, its on the front of the throttle body, two screws hold it on the front side of the TB with a wire connection at the bottom of the sensor
Old Dec 22, 2008 | 03:43 PM
  #29  
skumbee's Avatar
skumbee
Thread Starter
2nd Gear Member
 
Joined: Sep 2006
Posts: 215
From: ca
Default

well to be honest i didnt built the engine i had a friend of mine do it for me and he knows his stuff pretty damn well......and i remember the day i went 2 his house 2 pick it up he was messing around with the voltage on the TB and what not and he recommended that i did a dyno tune.....he also told me that he met other people that have had the same problem with the e303 cam im running ...soo thats y i posted this thread
Old Dec 22, 2008 | 05:12 PM
  #30  
FivePointOhh's Avatar
FivePointOhh
in limbo
 
Joined: Jan 2007
Posts: 7,300
From: Iowa
Default

i understand. if you arent lookin to learn how to do this you can always take it to a shop to get it adjusted properly for you. otherwise if you want to get her running right we can help you.



All times are GMT -5. The time now is 05:42 PM.