Bumpsteer with 96+ Spindles?
#1
Bumpsteer with 96+ Spindles?
Does the extra 8mm track width of the 96+ spindles cause bumpsteer or is it the location of the tie rod mounting? I have been discussing this with another guy at a local forum and he said after he put 99 spindles on his vert he has alot of bump steer. But he sent me pics of the tie rods and they are almost perfectly level so I don't think that the tie rod mounting location is the problem. Who knows and can explain???
#4
This depends on what K-member/rack you plan on using.
Read this...
http://www.maximummotorsports.com/st...to9604_spindle
Read this...
http://www.maximummotorsports.com/st...to9604_spindle
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM