AntiRiceRacing

I am building a mild 351w bored .60 over w/ aluminum heads, and it is my first build so sorry if this is a dumb question. Will i need a special set of gaskets because it is bored over? Or can i just use normal sbf gaskets? Any help is appreciated.

5.0kid

Most manufacturers make them in several sizes

AntiRiceRacing

Alright i was looking at head gaskets on summit for a 4.060" bore (which im pretty sure my pistons are), how do i know what compressed thickness and volume to get? I remember hearing somewhere the thickness can give you more or less compression, is that true? If so, i want the most compression i can get.

5.0kid

the less the compressed height the more compression you are going to go. You may have to go over size somewhat or trim a smaller one someone most likely makes a .060 bore

mjr46

most oem's will cover up to 4.100 iirc but don't quote me

sn95_331_GT_ yellow

Fel-Pro 1011-2

4.100", .039" compressed thickness

^ ^ ^ ^ ^
thats what im running FWIW...