CHANGING CAM
10-09-2011, 02:50 PM
Thread Starter
Join Date: Aug 2011
Location: FL
Posts: 20
CHANGING CAM
Do you need to remove the motor or can you get away with only the radiator ?
10-09-2011, 05:15 PM
M.A.D. Motorsports
Join Date: Jul 2006
Location: Indiana
Posts: 8,014
Pull the valve covers, intake, radiator, and timing cover....be sure to remove the lifters before you pull the cam
If you still have AC then the condensor might slightly get in the way but it can be done in the car.
10-09-2011, 06:19 PM
4th Gear Member
Join Date: Apr 2009
Location: N.C.
Posts: 1,893
Look under front of oil pan for the 4 bolts that go into timing cover.
10-09-2011, 06:21 PM
M.A.D. Motorsports
Join Date: Jul 2006
Location: Indiana
Posts: 8,014
Quote:
Originally Posted by
Bubba 95SN
Look under front of oil pan for the 4 bolts that go into timing cover.
This is so hat you dont break your timing cover when removing it..
10-09-2011, 06:49 PM
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
best to loosen all oil pan bolts to let it hand down a little, makes it easier to slide off and on
10-10-2011, 03:05 PM
Thread Starter
Join Date: Aug 2011
Location: FL
Posts: 20
thanks guys, was worried about taking out the condenser cause my a/c throws snow ***** right now. if I can move it without disconecting it to get the cam out it would make me very happy
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM
EASTIDEE123
5.0L (1979-1995) Mustang
14
09-14-2015 03:52 PM
Ryan Fitzpatrick
New Member Area
3
09-14-2015 02:21 AM