Hell, for $500 I'll just redo your whole system.

Front Amp - http://ikesound.com/product-product_id/2217$75

Front Speakers - http://www.woofersetc.com/index.cfmf...roduct_ID=5207$100

Sub Amp - http://ikesound.com/product-product_id/2552$100

Sub - http://www.tcsounds.com/tc7.htm$130

Wiring - cheap 4 guage setup from wal-mart -$30-40

Box - 1 8x4 sheet of MDF $25, course thread drywall screws $3, Liquid Nails adhesive - $5, silicone sealent $2, carpet $10, headline adhesive $10. -----------$55

That totals a little under $500 and would be a great setup for the money.

If you don't have an aftermarket HU with dual preouts two LOC's would be another $25.

 

i have a Kenwood KDC-MP205 HU...... is there anything else for a sub that has more power?? u can scratch the speakers i decided not to mess with them, im just gonna keep them stock with the stock amps sooo go all out with the sub and amp.

 

Amp - http://ikesound.com/product-product_id/4368$220

Subs - 2 of the same subs as above http://www.tcsounds.com/tc7.htm

Wiring - same

box - same

 

A 12" sub will fit. I made this one for a buddy of mine with a 2002 GT. If you are interested in haveing a box built contanct me.

 

And with good reason. A kid had 2 of those and one of their 4000 watt amps one day and we went out and hooked up an MTX 500 watt amp and 2 7500 10"'s and he returned the PA equipment came back the next day and bought the MTX stuff. And kept like an extra $50 in his pocket.

My FUBAR's I had took like a month to break in after I blew through 3 pairs of them. No driver should have to be broken in like that.

 

Heres the design I did to fit in my car. You got a max of 15in in height in the trunk and the front takes advantage of that to fit the sub standing upright. It angles down tword the back to clear the rear deck speakers. I needed it ported but you can delete the port and center the sub and it will still be 1.3 cubics.

 

thanks for the dimensions mike.... by the way what kind of sub do u have?

 

Type R

 

Lando, make sure you adjust the dimensions for your sub.

The port lengh/diameter equations are easily calculated at www.bccae1.com

 

what is it running of and is it loud enough??