will these fit?
Thread Starter
5th Gear Member
Joined: Dec 2005
Posts: 3,806
From: DFW
will these fit?
ok, i have to run to work for a few hours, but maybe someone(leaning towards thumpin) can tell me if these would fit?
http://cgi.ebay.com/ebaymotors/1968-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/1968-...QQcmdZViewItem
I ♥ Acer
Joined: Oct 2004
Posts: 17,565
From:
RE: will these fit?
Yeah, Thumpin is a fart smeller.....errrrr.....smart feller. 
Here is the fitment chart. Check it out yourself. Looks like you will have clearance issues if you have a scattershield on your bellhousing and are running a toploader.
http://www.stanginfo.com/Headers/headeroptions_view.php
Here is the fitment chart. Check it out yourself. Looks like you will have clearance issues if you have a scattershield on your bellhousing and are running a toploader. http://www.stanginfo.com/Headers/headeroptions_view.php
Thread Starter
5th Gear Member
Joined: Dec 2005
Posts: 3,806
From: DFW
RE: will these fit?
ORIGINAL: Soaring
Yeah, Thumpin is a fart smeller.....errrrr.....smart feller. Here is the fitment chart. Check it out yourself. Looks like you will have clearance issues if you have a scattershield on your bellhousing and are running a toploader.
http://www.stanginfo.com/Headers/headeroptions_view.php
Yeah, Thumpin is a fart smeller.....errrrr.....smart feller.
Here is the fitment chart. Check it out yourself. Looks like you will have clearance issues if you have a scattershield on your bellhousing and are running a toploader. http://www.stanginfo.com/Headers/headeroptions_view.php
thanks, when my dad gets home in about 30 minutes, im going to bid on it
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
BeatnikFink
New Member Area
6
Oct 1, 2015 08:00 PM