I'm putting new seats in my 67 from an 04 GT Convertible. The driver's seat is power. It has a 4 pin connector. Can anyone point me in the direction of a wiring diagram or pinout for this 4 pin connector? Thanks!

 

Got it figured out. There is only one 4 pin connector. Looking at the face of the connector with the locking tab up, the right two (vertical pair) are for the seat belt idiot light, and the left two are power and ground. Hooked it to a 12 volt battery and the seat works great. front/back, up/down, and rear up/down as well as front up/down. This is going to be great when I get it installed!