Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

'67 289 C4 Kick Down Cable

Thread Tools
 
Search this Thread
 
Old Apr 24, 2007 | 11:48 AM
  #1  
nassaubayman's Avatar
nassaubayman
Thread Starter
3rd Gear Member
 
Joined: Mar 2007
Posts: 574
From: Houston, TX
Default '67 289 C4 Kick Down Cable

I've owned my '67 Coupe for only 1 month. The car wouldn't hit passing gear, so I bought a new kick down cable. With the cable adjustment as short as it will go, it isstill 1-2 inches too long.

I'm assuming that's the correct C4 transmission. I wouldn't think the throttle linkage has been replaced or modified. The cable I bought matched the one that was already on the car (come to find out, there was no need to buy a new one).

Did Ford make kick down cables of different lengths?
Old Apr 24, 2007 | 01:00 PM
  #2  
iamdiffrnt's Avatar
iamdiffrnt
2nd Gear Member
 
Joined: Jan 2007
Posts: 190
From:
Default RE: '67 289 C4 Kick Down Cable

When I did mine (on a 68) the kick down lever on the trans was very short, so I set it at full travel with the accelerator at wide open throttle. When the accelerator was released there was about an inch or so of slack. IIRC.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AllStar80
Classic Mustangs (Tech)
70
Jun 9, 2009 03:12 PM
syfhler
Classic Mustangs (Tech)
2
Mar 18, 2007 07:37 PM
Todd1919
Classic Mustangs (Tech)
2
Sep 16, 2006 11:45 PM
zanoman
Classic Mustangs (Tech)
5
Feb 4, 2006 07:02 PM
DezertMachine
Classic Mustangs (Tech)
4
Dec 19, 2005 11:49 PM




All times are GMT -5. The time now is 10:39 AM.