I need to see what a 67-70 power steering setup looks like. my return and high pressure hose rup against my exhaust headers everytime i turn left. I was told about a power steering hose bracket, but i dont see where i could put it that it would make any difference.

So if anyone has any pictures or links to them or anything please let me know, ive looked but i cant find any.


also i found that on 69's they route these hoses under the lower control arm, is that advisable or should i stay away form doing that. It may be my only solution.

 

Sorry to bump. But i need the car tomorrow night. I dont need the pics, but I do need to know if its possible to run the return and high pressure hose under the lower control arm in a 68 coupe with a 289

 

Let's start with this schematic.

http://rides.webshots.com/photo/2373...Ip?vhost=rides

I can always go take a pic of mine if I have to

 

The picture of yours would be incredibly helpful. I started today with it, the high pressure hose made it past and doesnt touch the exhaust near where its connected to the pump. SO im happy about that. and the return hose wasnt long enough to route that way. So i ordered a few feet that should get here tomorrow. Do I need that bracket, or should i just have it just to be safe because i only turned the wheel in the drive way and it looks fine.