When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I can imagine this is very true. They are the ones that go down thru the trunk to the lights outside and the one that the fuel tank guage wire goes thru. Any ideas?
I use a shorty flat screwdriver and work my way around. Don't do this cold, if you plan to re-use the wiring. An old hair dryer will make the rubber more pliable, with no chance of overheating.
01-08-2011, 11:21 AM
