Today I finished putting my 200CI back together. While loading it on to my truck to take it to the paint shop My whole motor fell from the truck and landed on the valve cover. Yes life can suck, I was going to put it in tomorrow, I will survive I will not give up.</P>


I now need to replace: a valve cover, a fuel pump, a dizzy, a push rod, and an oil pan. All for a 1966 200CI 6Cyl.</P>


If you have any of these parts (or a whole motor)and will let chem go CHEAP, please message me or email me.</P>


Thanks</P>

 

Hey man that really sucks but i have 2 6 cylinder engines with all the parts you need make me an offer on all the parts and well go from there. Corey

 

Can you give me a weight (aprox) on a complete motor and your zip so I can figure shipping. I would like a complete motor so I can beef one up while driving the other. But I fear shipping cost will limit my purchase to the dizzy the fuel pump the valve cover the oil pan and one push rod.(and the exhaust manifold) </P>


I need to figure shipping so I can make you an offer.</P>


Please get back to me so we can work some #s</P>


ps how much for a carb?</P><edited><editID>Utah 66</editID><editDate>37977.9528356481</editDate></edited>

 

Im not sure i would say no more than 250 pounds and my zip code is 66106

 

I have never heard the engine run it was supposed to run when i got it. It is complete other than the carb, starter, alternator, and i think thats it
<edited><editID>1966 Mustang15</editID><editDate>37977.9645833333</editDate></edited>

 

i was talkin about the wrong motor if you read my first post when i said it was rebuilt sorry

 

I had a 170 engine shipped from California to Connecticut and it weighed 240lbs. It is virtually the same motor, so the weight would probably be 10-20lbs more. I couldn't tell how much shipping was, because it was billed into the price of the motor. I Hope this helps.