Keyless entry 99. Repogramming does not work
#1
Keyless entry 99. Repogramming does not work
My car was delivered without the keyless remote trensmitter so i bought one on Ebay
Tried several times with the instructions on programming keyless remote entry (ignition off to on 8 times and so on...)
The doors does not lock/unlock as described in the instructions. Anyone else had that problem? Solution?
Does all 99 GT:s have the keyless remotebuilt inor is it an option maybe?
Thanks
Petter
Tried several times with the instructions on programming keyless remote entry (ignition off to on 8 times and so on...)
The doors does not lock/unlock as described in the instructions. Anyone else had that problem? Solution?
Does all 99 GT:s have the keyless remotebuilt inor is it an option maybe?
Thanks
Petter
#4
RE: Keyless entry 99. Repogramming does not work
we just went through the same thing at the shop last week...we changed a lock cylinder on a ford tarus...we had to use a ford scan tool to reflash the PAT system.
#5
RE: Keyless entry 99. Repogramming does not work
ORIGINAL: petter
My car was delivered without the keyless remote trensmitter so i bought one on Ebay
Tried several times with the instructions on programming keyless remote entry (ignition off to on 8 times and so on...)
The doors does not lock/unlock as described in the instructions. Anyone else had that problem? Solution?
Does all 99 GT:s have the keyless remotebuilt inor is it an option maybe?
Thanks
Petter
My car was delivered without the keyless remote trensmitter so i bought one on Ebay
Tried several times with the instructions on programming keyless remote entry (ignition off to on 8 times and so on...)
The doors does not lock/unlock as described in the instructions. Anyone else had that problem? Solution?
Does all 99 GT:s have the keyless remotebuilt inor is it an option maybe?
Thanks
Petter
looking for the site now will ost back.
#6
RE: Keyless entry 99. Repogramming does not work
Code:
http://www.programyourremote.com/
now can anyone tell me how to turn off the engine warning light-without paying a mechanic 40 bucks.
did it on my 96 Nissan Maxima for free.
#7
RE: Keyless entry 99. Repogramming does not work
The "short out the 2 wire..." solution does not work on 99+. Neither did disconnection ofthe battery.
Thank you Samoyed but thats the original solution and does not work.
Theproblem may occured when i removed the lock cylinder (you are not allowed to have blinkers and brake lights in the same bulb in Europe. ) I did cut the green wire and put the cylinder back again.
Comments?
Thanks anyway
Thank you Samoyed but thats the original solution and does not work.
Theproblem may occured when i removed the lock cylinder (you are not allowed to have blinkers and brake lights in the same bulb in Europe. ) I did cut the green wire and put the cylinder back again.
Comments?
Thanks anyway
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM