General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Exhaust - Quick Answer Needed

Thread Tools
 
Search this Thread
 
Old Dec 7, 2007 | 07:08 AM
  #1  
shawnneefl's Avatar
shawnneefl
Thread Starter
 
Joined: May 2006
Posts: 24
From:
Default Exhaust - Quick Answer Needed

I'm getting my wife an offroad H-Pipe for Christmas. We are removing her cats of course. Where can I obtain the bypass so the stupid a$$ service engine light gimmick goes out. Thanks![/align][/align]Shawnn[/align]Safety Harbor, FL [/align]
Old Dec 7, 2007 | 09:19 AM
  #2  
Chopper's Avatar
Chopper
5th Gear Member
 
Joined: Feb 2004
Posts: 2,028
From:
Default RE: Exhaust - Quick Answer Needed

MIL eliminators from just about any company that sells anything for Mustangs.
Old Dec 7, 2007 | 11:47 AM
  #3  
Murdoc's Avatar
Murdoc
I ♥ Acer
 
Joined: Jun 2007
Posts: 112
From: Glamasu
Default RE: Exhaust - Quick Answer Needed

you are going to want to get her car dyno tuned if you are removing the cats.
Old Dec 7, 2007 | 12:08 PM
  #4  
shawnneefl's Avatar
shawnneefl
Thread Starter
 
Joined: May 2006
Posts: 24
From:
Default RE: Exhaust - Quick Answer Needed

Dyno Tuned.. why? Sorry I don't know mustangs, only big chevy mud trucks lol. This is her deal. I was told all we had to do was remove and add the h pipe.
Old Dec 7, 2007 | 12:48 PM
  #5  
MU71L4710N's Avatar
MU71L4710N
5th Gear Member
 
Joined: Aug 2007
Posts: 3,189
From:
Default RE: Exhaust - Quick Answer Needed

dyno tuned? holy crap no you dont have to have the car dyno tuned to put an O/R pipe on.

u just need mil elimslike chopper said, i bought mine from HERE


on mine i had to grind off some of the tabs to get the mil to plug into the 02 harness, no biggie youll understand how/why if you try to install them and they wont go in.

youll need a 15mm socket, a ratchet, a 2 foot extension, a swivel head, and a lift prefferably or jack stands.

get the car up, remove the 4 bolts holding the h pipe to the catback,use the swivel head to get in to break the bolts holding it to the exhaust manifolds....they will probably be a bitch to get off i had to use a breaker bar. undo those 4 nuts (2 on each side), pipe will drop down, get the new one up in there, bolt it in.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
Sep 20, 2022 01:04 AM
richard1027
GT S197 General Discussion
3
Sep 8, 2015 01:24 PM
91StangOwner
5.0L (1979-1995) Mustang
5
Aug 20, 2015 11:34 PM
defarmer
5.0L (1979-1995) Mustang
3
Aug 13, 2015 06:40 AM
Itstbrown
V6 (1994-2004) Mustangs
1
Aug 9, 2015 03:49 AM




All times are GMT -5. The time now is 12:56 PM.