General Tech Ask model specific questions in the appropriate category below. All other general questions within.

help t5 no reverse

Thread Tools
 
Search this Thread
 
Old 02-10-2008, 04:42 PM
  #1  
Mikenindy1972
Thread Starter
 
Mikenindy1972's Avatar
 
Join Date: Feb 2008
Location:
Posts: 6
Default help t5 no reverse

I pulled wrong plug out of the side of the T5 tranny and lost reverse. I need tech on how to get into the linkage and fix said probelm. I here it is rather common all help is greatly appreciated
Mike
Mikenindy1972 is offline  
Old 02-11-2008, 12:00 AM
  #2  
Mikenindy1972
Thread Starter
 
Mikenindy1972's Avatar
 
Join Date: Feb 2008
Location:
Posts: 6
Default RE: help t5 no reverse

bump
Mikenindy1972 is offline  
Old 02-13-2008, 07:51 PM
  #3  
Mikenindy1972
Thread Starter
 
Mikenindy1972's Avatar
 
Join Date: Feb 2008
Location:
Posts: 6
Default RE: help t5 no reverse

bump
Mikenindy1972 is offline  
Old 02-13-2008, 10:17 PM
  #4  
mrdeep2001
2nd Gear Member
 
mrdeep2001's Avatar
 
Join Date: Jan 2007
Location:
Posts: 295
Default RE: help t5 no reverse

I dont know much about trannys, but I will try to help. What plug are you talking about?
mrdeep2001 is offline  
Old 02-14-2008, 01:49 PM
  #5  
Tberg725
3rd Gear Member
 
Tberg725's Avatar
 
Join Date: Jul 2006
Location: Michigan
Posts: 835
Default RE: help t5 no reverse

That really doesnt make sence, the only two plugs that are on the T-5 are the fill plug and drain plug, both facing the passenger side. The fill plug is on top and the drain on the bottem....
Tberg725 is offline  
Old 02-14-2008, 08:27 PM
  #6  
Mikenindy1972
Thread Starter
 
Mikenindy1972's Avatar
 
Join Date: Feb 2008
Location:
Posts: 6
Default RE: help t5 no reverse

Well it is not really a plug it is a bolt on the passenger side of the tranny. I have been told by a few people that it is a common mistake when and lube to the t5. like most peopl i pulled it out thinking it was the fill plug but instead it holds part of the linkage for reverse in place.now to fix said problem you have remove the top cover from the tranny and replace the link and reinstall the bolt. This is where I get stuck I have the tranny out of the car, and the bolts removed from the cover, but theLinkage from the shifterruns along the top of the tranny though the cover. the only fastener i can see hold the shift link is a roll pin in under the shifter cover it. Is there a way to remove the top of the tranny with out pulling all of the shift linkage out?
Mike
Mikenindy1972 is offline  
Old 02-14-2008, 11:31 PM
  #7  
Tberg725
3rd Gear Member
 
Tberg725's Avatar
 
Join Date: Jul 2006
Location: Michigan
Posts: 835
Default RE: help t5 no reverse

Anyway you can take a pic of the bolt you pulled out?
Tberg725 is offline  
Old 02-15-2008, 09:11 PM
  #8  
Mikenindy1972
Thread Starter
 
Mikenindy1972's Avatar
 
Join Date: Feb 2008
Location:
Posts: 6
Default RE: help t5 no reverse

yes I take it tonight and upload it
Mike
Mikenindy1972 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gene K
S197 Handling Section
1
10-21-2015 11:37 PM
foxdude
5.0L (1979-1995) Mustang
5
09-24-2015 08:45 PM
maestro1024
Classic Mustangs (Tech)
6
09-21-2015 02:40 PM
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM
Pyrate Dave
5.0L (1979-1995) Mustang
8
09-10-2015 07:30 PM



Quick Reply: help t5 no reverse



All times are GMT -5. The time now is 07:55 PM.