90 mustang PCV & Crankcase filter locations!!!!!
#1
90 mustang PCV & Crankcase filter locations!!!!!
I have a 1990 mustang that i recently tuned up. In the owners manual it says to check and replace the PCV & Crankcase filter and I cant seem to find these items. Pictures 1, 2, & 3 give you an idea of the engine compartment and pictures 4 & 5 are the parts Autozone gave me for my car....
Could anyone please tell me where in the pictures the PCV & Crankcase filter are located?????
Thank you....
pic 1
Pic 2
Pic 3
pic 4
Pic 5
Could anyone please tell me where in the pictures the PCV & Crankcase filter are located?????
Thank you....
pic 1
Pic 2
Pic 3
pic 4
Pic 5
#2
The Crankcase filter should looks like this.
And to remove that filter you can remove it with either a pair of needle nose pliers or a screw screwed in the the mesh to help you slide the filter out.
Where this filter is located at is at the very backside of the lower intake.
And this is a where you'd place the filter.
And to remove that filter you can remove it with either a pair of needle nose pliers or a screw screwed in the the mesh to help you slide the filter out.
Where this filter is located at is at the very backside of the lower intake.
And this is a where you'd place the filter.
#4
Another Question
the car has about 144, 000 miles on it. Is the PCV and Crank filter necessary to replace???? I put new rotor, bosch plat-2 spark plugs, dist. cap, oil change, and dist. wires. I have not set the timing yet and the problem I am having is that when you step on the gas you can feel a little hestitation in the car. It did this before and after the tune-up.
What do you think this could be?????
What do you think this could be?????
Thread
Thread Starter
Forum
Replies
Last Post
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM