General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by:
Sponsored by: DashLynx

Wondering about throttle bodies

Thread Tools
 
Search this Thread
 
Old 11-28-2005, 02:46 AM
  #1  
stangman2354
3rd Gear Member
Thread Starter
 
stangman2354's Avatar
 
Join Date: Nov 2005
Location: Canton, OH
Posts: 838
Default Wondering about throttle bodies

I was wondering if i should get a throttle body after i get my intake and exhaust system and if it will give that much of an increase in power and what kind
stangman2354 is offline  
Old 11-28-2005, 03:40 AM
  #2  
03YellowPony
6th Gear Member
 
03YellowPony's Avatar
 
Join Date: May 2005
Location:
Posts: 7,445
Default RE: Wondering about throttle bodies

ORIGINAL: stangman2354

I was wondering if i should get a throttle body after i get my intake and exhaust system and if it will give that much of an increase in power and what kind
If you do, you will have to port the intake opening to match the new T/B. Otherwise, you can actually lose power.
03YellowPony is offline  
Old 11-28-2005, 10:59 AM
  #3  
Chopper
5th Gear Member
 
Chopper's Avatar
 
Join Date: Feb 2004
Location:
Posts: 2,028
Default RE: Wondering about throttle bodies

Get a better plenum when you get the T/B.A better flowing plenum gives bigger gains than a bigger T/B.MM&FF did a test(Apr 04)on a near stock 02 GT that gave a 10 HP and 10 FT/LBS of torque.A 75mm Accufab T/B was added and and the numbers went up by 2 HP and 3 FT/LBS of torque.A bigger T/B without a bigger plenum opening would cause turbulence in the upper intake and probably cost you a couple of horses.
Chopper is offline  
Old 11-28-2005, 06:04 PM
  #4  
92hatchLX
6th Gear Member
 
92hatchLX's Avatar
 
Join Date: Feb 2005
Location:
Posts: 8,439
Default RE: Wondering about throttle bodies

Get the intake and yes get a bigger throttle body AFTER the intake.
92hatchLX is offline  
Old 11-29-2005, 01:17 AM
  #5  
88BlueGT
6th Gear Member
 
88BlueGT's Avatar
 
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
Default RE: Wondering about throttle bodies

Yea, there are alot of reputable companies who make throttle bodies (accufab, bbk, etc. etc. etc.)
88BlueGT is offline  
Old 11-29-2005, 11:40 AM
  #6  
nitrous_bob
6th Gear Member
 
nitrous_bob's Avatar
 
Join Date: Oct 2005
Location: st clair shores MI
Posts: 6,028
Default RE: Wondering about throttle bodies

i wouldn't bother...you won't benefit until heads are swapped.

maybe .005 but not even worth getting your hands dirty.
nitrous_bob is offline  
Old 12-01-2005, 12:21 AM
  #7  
moosedan
1st Gear Member
 
moosedan's Avatar
 
Join Date: Jan 2005
Location:
Posts: 65
Default RE: Wondering about throttle bodies

sure he would benefit. why would you say that? are you telling me the stock tb would be the same result if he used a aftermarker tb? tsk tsk tsk. yes, get the bigger tb. i was putting out 300+ with stock heads and that would included a bigger tb.
moosedan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jb145700
4.6L V8 Technical Discussions
9
08-21-2022 06:37 AM
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
3
09-18-2015 12:27 PM
94stangnewbe
V6 General Discussion
0
09-07-2015 07:39 PM
Webster454
2005-2014 Mustangs
1
09-07-2015 04:59 AM
Mustangmalo
General Tech
2
09-06-2015 05:22 PM



Quick Reply: Wondering about throttle bodies



All times are GMT -5. The time now is 06:40 AM.