blueherd02gt

Spohn: LCA's (combo type), Panhard bar.
BMR: Panhard bar support, Front A-arm Support Brace, 7/8" Swaybar
Anyone know any tips to look out for as far as installing these mods? I'm doing them myself.
Thanks in advance
Dave

buddha211

Make sure you have silicone grease handy to lube the bushings properly or else you'll be stuck waiting on it like me. There's a couple of threads floating around right now about how jacked up it is they don't include a cartridge of the stuff with the parts. Steeda sent me 2 3oz packets of Energy Suspension silicone for the loose bushings on my swaybar, but I'd rather use the grease gun on the zerk fittings on the bmr parts.

blueherd02gt

Panhard support, A arm support, and panhard bar is in.....Still waiting on the other stuff [&o]. No problems so far....