Urgent: Koni STR.T install question
#1
Urgent: Koni STR.T install question
Installing my STR.Ts now...are you guys putting moly grease (or similar) on the bolts that attach them to the frame?
Also, Do the bolts nuts need locktite? Or just a heavy dose of 'torque' (say ~ 120 in/lbs or so?)
Thanks
dh
Also, Do the bolts nuts need locktite? Or just a heavy dose of 'torque' (say ~ 120 in/lbs or so?)
Thanks
dh
#2
Definitely don't grease the bolts. What do you mean by frame? Don't use locktite, just torque the specs recommended by ford. I believe it's 165lbs on the lower bolt for a 2011 (less for poor years) and 26 lbs on the upper strut mount bolts. Don't get any heavier up top or you will snap the bolt and ruin your day.
Thread
Thread Starter
Forum
Replies
Last Post
Shifty Magoo
Audio/Visual Electronics
0
08-25-2015 03:08 PM