jojobanks

the good thing about the innovate system is you can interface it with a lot of popular tuning programs. Then you gan actually view the a/f ratios in the graphs according to actual a/f values, not just what the pcm sees. you can also graph it on your datalog, instead of having to sit there and watch your a/f gauge all the way through a pull.

WannaBeGearHead

Yup. I just have to get the cable to make it work. It will be nice being able to datalog the a/f and not just go off memory from the previous pull when adjusting the tune.

Stone629

Yep, doing it that way def sucks. I wouldn't even let someone tune my car if they wanted to do it that way.

jojobanks

I've done it that way (it DOES suck). With my first car I wasn't smart enough to buy an innovate, so i just mounted the a/f gauge next to my tach and put a camera on it through the runs. it'll work if you've got nothing else, but in this case just get the right stuff and make it easy.

S8ER01Z

Any updates with the LTs Stone? I'm still on the fence... those 1 7/8 Texas Speed headers are out of stock until Feb... 500 for the LTs and 130 for a 3inch Y. :/

Stone629

All good so far. One of the cheap ebay extensions won't stay plugged in, so I ordered another one to replace it. Its bank one, sensor 1, so its reading high voltage (telling the pcm its too lean), causing it to demand fuel and run rich. No big deal though, a new o2 extension will fix it. Highly recommend OBX man, great product.


Hoping to track test them this Sunday weather permitting. 12.2-12.3??