B heads and C heads. - MustangForums.com

SVT Forums

B heads and C heads.

Reply

 
 
 
Old 09-04-2008, 11:57 AM
  #1  
Sxynerd
6th Gear Member
Thread Starter
 
Sxynerd's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 11,783
Default B heads and C heads.

First off someone clarify for me so I know correctly, B heads are 96-98 and C heads are 99+. Or did the heads change again in 03/04.


Next,
Can a whipple from an 03/04 fit onto a 96-98 even though the ports are different?


Also,
What is the power range for a 96-98 4v pushing 10lbs of boost -vs- 99+
both with basic boltons, stock long block. ____Vortech___btw not whipple.

I'm just looking for averages here, nothing exact. And there is plenty of info to give a guestament.


thanks

Me.
Sxynerd is offline  
Reply With Quote
Old 09-04-2008, 05:00 PM
  #2  
myslow2002gt
3rd Gear Member
 
Join Date: Aug 2008
Location: Michigan
Posts: 578
Default

99/01 Castings were called "C" Heads. 03/04 Castings are different (still a tumbleport design) but with a larger, more efficient exhaust port.

No, an 03/04 whipple will not work on B heads.

Power rating between all the years would be close to the same, however low-mid range power is a strong advance for 99+ cars.
myslow2002gt is offline  
Reply With Quote
Old 09-05-2008, 07:57 AM
  #3  
BraMas
5th Gear Member
 
BraMas's Avatar
 
Join Date: Jun 2005
Location: Holland, MI
Posts: 4,634
Default

I'm tellin you go to that website I told you to go to for good info.
BraMas is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
11
03-12-2018 04:16 PM
mustangheaven
Motor Swap Section
3
01-03-2016 11:20 AM
kevsgt
2005-2014 Mustangs
5
10-09-2015 10:12 PM
mustangheaven
Classic Mustang General Discussion
2
10-07-2015 10:23 AM
Drastang
4.6L (1996-2004 Modular) Mustang
2
09-30-2015 03:48 AM

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory