livefast1

viper spec? if so, if it wasn't do you think the 28" tires would have been alright?

Blownsvt

no it is not the viper spec. i have the normal cobra ratios. It just seemed like there was not enough gear to get it out of the hole with the little bit of boost i could get on the 2 step. Even dropping it from 53-5400 it would bog down to the point of stalling beacuse there is no tire spin at all. if i would ride the clutch out of the whole to keep the rpms up then it would make passes like the one in the video. if i tried to run it hard it would bog out and the 60ft would be in the 2.6- 2.8 range. I think with the current 2 step and 3.73 gears it would have been much better on the 28's. We'll see if it gets better on the 26" i picked up when the track opens. i also plan on testing out one of the new 2 steps that is allowing alot more boost on leave. adding all the addiotional power to the launch might make the 28" perfect.

livefast1

were you trying to launch on the sct 2 step? doesn't it take a long a$$ time to build even just a little bit of boost on that?

Blownsvt

yep i was just on the sct 2 step. it takes a few seconds to get it going. most i have ever seen in 7.5 on it but it usually is around 5 or so. not enough.