Bolting an 03 Eaton to a 96 Cobra
#1
Bolting an 03 Eaton to a 96 Cobra
I have recently wanted to add a mild supercharger setup to my 96 cobra and have been looking around. I have noticed that 03 - 04 superchargers with low miles can be had for less then 500 bucks. With the right pully and some small mods I know 500 hundred horses could be easily reached. I havn't heard of anyone doing this swap and understand their are some small differences in the upperend of the head and the lower intake. I was wondering if anyone knew what would be needed to do the swap?
#5
RE: Bolting an 03 Eaton to a 96 Cobra
I asked a question bout this at another forums and heres what i got. If you wanted an eaton on a 98 youd have to get 03 cobra heads and from what i hear it would involve alot of stuff to get that mod done. However if u really want a big twin screw on a sn95, seitch to 99-01 cobra heads and buy the KB kiet. Should be a lil easier. Hope this helped.
Thread
Thread Starter
Forum
Replies
Last Post