Rook6

What will everyone's completed long-term builds contain? I like to think ahead.

Suspension/Handling
04 Cobra Independant Rear Suspension (don't they make a strut brace for this too?)
Maximum Motorsports IRS Grip Box (bushings, end links, C/C plates,the works)
Maximum Motorsports Tubular K-Member/Control Armspackage
Coil-Over Conversion (Front, maybe rear)
Tokico D-specs, all around
Kenny Brown Full-Length Subframes and Matrix System w/ Jacking Rails
BBK Strut Brace
Solid, Center-drilled Steering Shaft

Brakes
13"(only if 14" won't fit) Front Brake Package (Steel Braded lines and all)
Brake Proportioning valve

Drivetrain
Eaton LSD
Lightweight Driveshaft (Aluminum...carbon fiber...might even stay with stock material depending on research)
Lightweight Flywheel
Spec Stage 2 or 3 Clutch
Steeda TriAx
T-5 Dogtooth Conversion. (If I can't find a sequential 6-speed that'll fit....Quaife...hello?)
Don't know if I should stick with 3.55s or go back to 3.73s

Engine
SSM Stage 3 w/Install Kit
All Forged 3.8LRotating Assembley
Morana V6 RacingStud Girdle

Boost
Twin Turbo Setup (Maybe TMA but probably just a custom setup with twin 18Gs...more research needed)
Boost Controller, Wastegate, BOV,Turbo Timer, etc.

Extras
G-Force Computer
Goodyear Tire Pressure Monitoring System(cheaper than you'd think)

Visual
PMP 05 Front end conversion
Z3 Fenders (yeah yeah....trust me, it'll work)
Steeda Cowl Hood w/Louvers
18x9 (maybe staggered 18x10) Steeda Ultralights.
"NO FLYBY" brakelight decal (already have this...and I love it)
Might tint it.
On the fence about lambo doors and a billet fuel door.

NvRdoNeStAnGsIx

So when you die, will you finish this project in the next life or the one after that.. lol.

Rook6

Actually, I was doing the math one day. It should only take me 2 years at the longest, probably much less depending on how many deployments I go on.

jthorn9

My short term goals are:

Intake
1.) Granatelli Chrome 90mm Mass Air Sensor
Engine
1.) BBK High Flow Fuel Regulator
2.) Holley 155lb Hr. Fuel Pump
3.) BBK High Flow Fuel Rails
Tansmission
1.) G-Force T-5 Upgrade Kit
Driveline
1.)Detroit True LockLimited Slip Differenital
2.) A new set of 3.55 Gears
Exterior
1.) Urathane Saleen Body Kit
2.) Fiberglass Saleen Hood
4.) New Saleen S-351 Wing
5.) New Custom Paint Job (restoring yellow) with the engine block beingpowdercoated silver
6.) 17" Saleen Replica Rims
7.) Vertical Door Kit
Interior
1.) Vinyl Rear Seat Delete
2.) Satin Gauge Face Cover
Engine Bay Dress Up
1.) Polished Overflow Tank
2.) Polished Over Flow Tank Mount
3.) Polished Battery Box Cover
4.) Ford Racing Valve Covers

Long term goals:
11" Cobra Break Kit
347 Forged Stroker Kit or a Crate 351W Engine
9 PSI Polished Vortech Supercharger
Larger, more show gradeaudio set up

amrcnidyot

mine will take a little longer..at least for me it will, it will actually probabaly never happen.

exterior:
03 cobra front bumper
new mach 1 chin spoiler
put mach grill delete on cobra bumper
hid fogs and headlights
mach 1 shaker hood
03 cobra rocker panels
new window tint
mach 1 rear window louvers
03 cobra rear w/ mustang instead of cobra written in it
clear corner tinted headlights
satin black rear spoiler
targa top
Interior:
cobra front and rear seats
mach 1000 system look alike w/ aftermarket parts...havent really looked into this yet.
bullit dress up kit.
suspension:
already have strut tower brace and roush springs
8.8" rear end w/ 4.10 and detroit
tubular k-member
steeda front and rear sway bars
subframe connectors
adjustable shocks/struts
cobra brakes all around
Drivetrain:
frpp aluminum drive shaft
rebuilt trany w/ shift kit
higher stall tq converter
like i said above, 4.10 and detroit
Engine:
ssm 4.3 stroker kit
ssm stage 3 powerpack
bbk tb
higher flow fuel injectors
high flow fuel pump
new fuel lines
battery moved to trunk
twin prochargers at 11 psi. both intercooled..they come that way.
new radiator

im sure there is a lot more but i cant think of it right now.

flash20

jthorn WTF are u okay?

RyansQuick6

Hmmm, let's see

SuperSix Stage 2 haeds & cam pkg
SuperSix ported & polished intake
Vortech Supercharger
Remove N2O
Purty stuff all over the engine and interior

I've already got a lot done, it's these last few things that I need to build up my savings again for.

Ryan

v6stang07

exterior:
hood scoop black with custom black stripe on the hood to match
cobra side scoops
newer 2 post spoiler black
rear honeycomb panel
03-04cobra rear, shaved
window tint
some interior billet and engine billet
performance:
power pack, stage 2
cai
udp
4:10's
lsd
tuner