V6 S197 General Discussion This section is for technical discussions pertaining specifically to the V6 variation of the 2005 and newer Ford Mustang.

PO191 code.. fuel pump?

Thread Tools
 
Search this Thread
 
Old Feb 13, 2013 | 09:54 AM
  #1  
StangMuscle's Avatar
StangMuscle
Thread Starter
1st Gear Member
 
Joined: Dec 2012
Posts: 120
From: MA
Default PO191 code.. fuel pump?

Hello, Im experiencing thesame bogging down and intermittent starting issues as everyone else with the PO191 code. I have not replaced the fuel filter yet, the reason I haven't is because I believe my fuel pump is dead. I ran the stang to near empty then I started having the intermittent problems shortly after I refueled. My fuel pump stopped priming the lines and could no longer be heard. The code itself, or the fuel pressure sensor should not prevent the pump from operating correct? I checked the fuel pump wiring harness with a multi meter and upon turning the key I have 12v. I believe I checked it right.. I just probed the first 2 ports and the 2nd 2 ports with the pos ans neg probes. (If anyone could clear up which wires are pos/neg that could really help!) Anyway, I was sure it was the pump so I ordered a used pump off ebay and the pump isn't priming, just like the old one. Am I right in assuming its the fuel pump failure? Even if there was clogged lines/filters the pump should still prime upon turning the key, right? Thank you!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
19
Dec 19, 2023 01:12 PM
Bokeo
Street/Strip
6
Oct 10, 2015 08:28 PM
b8checker
Classic Mustangs (Tech)
8
Oct 8, 2015 12:55 PM
Sixx
2005-2014 Mustangs
9
Oct 5, 2015 07:36 PM
mrappe
V6 (1994-2004) Mustangs
0
Sep 26, 2015 10:16 AM




All times are GMT -5. The time now is 02:55 AM.