door window rivets and regulator rivets help
#1
door window rivets and regulator rivets help
I know they are all 1/4 inch rivets that i need to put my glass, regulator, and lock actuator back in my door but can anyone tell me wha length i need? I think 1/2 inch for the regulator and 3/4 inch for the window and lock actuator. 7 rivets total. Thanks
#4
I’m not sure what size it is. I’d have to take my wifey’s car door panel off to check. I’d just get a micrometer (available for less then $10 at most auto parts store) and measure the length of the existing rivets. Then drill them out and measure the inner diameter of the whole the rivet went into. Then get nuts/bolts to match (plus a little extra length for the nut).
Good luck...
Good luck...
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM