When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
anyone running a carb and using a stock tach.ive been trying to figure out which wires i would have to use to get it to work but im drawing a blank right now.
anyone running a carb and using a stock tach.ive been trying to figure out which wires i would have to use to get it to work but im drawing a blank right now.
I did it for awhile. Ran the stock tach wire to the neg coil post. I can't remember the color of the wire but I can check.
When I switched to carb my stock tach never worked again even after hooking up the dg/y wire to the neg side of coil.
For some reason my tach wire was tan. I tried hooking up the DG/Y wire and it wouldn't work either. Traced it back and found that for some reason mine wasn't the same color as most.